Lighting is the fastest way to change how a house feels, and in South Florida it is also where a lot of otherwise good renovations come apart — because the ceiling is concrete, the walls are block, and the fixture someone picked for its looks turns out to need a route nobody planned. Frazier Electrical Solutions LLC designs and installs interior and architectural lighting across Miami-Dade and Broward County.
Recessed and LED lighting, pendants and decorative fixtures, accent and cove lighting, under-cabinet runs, and the dimming and controls that decide whether any of it actually works the way you hoped.
Why choose Frazier Electrical Solutions LLC
- We survey the ceiling before quoting the layout. Slab, truss, furred-down soffit or accessible attic — that single fact decides what is possible and what it costs.
- Dimming is designed, not assumed. Most complaints about new LED lighting are flicker, buzz or a narrow dimming range, and nearly all of them come from a driver and dimmer that were never matched.
- Layered, not just brighter. Ambient, task and accent do different jobs. A ceiling full of evenly spaced cans is a common and expensive way to get a room that is lit but not comfortable.
- Licensed Florida electrical contractor, EC #13012609. New circuits are permitted and inspected work, and we treat them that way.
Our lighting process
- Walk the rooms. How each space is used, at what times, and what is wrong with the lighting now.
- Check what is above and behind. Ceiling construction, attic access, existing circuits and switch locations.
- Lay it out. Fixture positions, beam angles and spacing, switching groups, and which fixtures dim together.
- Specify the controls. Fixture, driver and dimmer chosen as a set, with colour temperature agreed before anything is ordered.
- Install and set. Cut, wire, trim and aim. Permitted and inspected where the work requires it.
What is different about lighting a South Florida home
The ceiling is often concrete. In condos and many newer houses the ceiling is a structural slab with no space above it. That rules out standard recessed cans entirely, and the answer is surface-mounted or shallow fixtures, a dropped soffit, or a cove built to carry the light instead — a design decision, not a wiring one, and much cheaper to make at the start.
The walls are block. Adding a switch where there is no switch means a chase in the block or a surface route. It is entirely doable; it simply is not the fifteen-minute job it would be in a timber-framed house, and it should be priced honestly.
Attics are hot and often cramped. Where there is an accessible attic it is the best route available, and it also means insulation contact ratings matter, because a fixture in a Florida attic works harder than the same fixture in a temperate one.
Colour temperature reads differently here. With this much daylight coming in, 2700K interiors that look warm in a showroom can read yellow at midday. We agree the temperature on site rather than from a catalogue.
Outdoor-adjacent fixtures live outdoors. Anything in a lanai, a covered terrace or a screen enclosure is exposed to salt and humidity and needs a rating that reflects it, whatever the room it is attached to.
Serving Miami, FL and nearby
Miami, Miami Beach, Coral Gables, Doral, Aventura, North Miami, Fort Lauderdale, Hollywood, Hallandale Beach and Pembroke Pines.
Call or text (786) 292-1194. Photographs of the rooms and the ceiling are genuinely useful before a visit.